Adsorptive polymer coating techniques and their application
DOI:
https://doi.org/10.32792/jeps.v12i2.229الكلمات المفتاحية:
Coating، polymer coating، adsorptive polymer coating، coating techniques، coating applicationsالملخص
Coating is a covering that is applied to the surface of an object, also known as the substrate (layer
under something else), Functional coatings change the surface properties of the layer underneath. It can
be applied for adhesion, wettability, corrosion resistance and wear resistance. As it has been well known
for a long time, UV radiation is among the most severe factors causing damage to organic materials of
which objects of coatings are typically made. Polymer coating degrades when expose to UV lights and
thus fail to protect the layer. Therefore, to dominance the degradation of polymers, a new path of
adsorptive polymer coating has been employed. The present review describes the salient features of
adsorptive polymer coating and their coating techniques. Moreover, adsorptive polymer coating
applications in various fields are briefed.
المراجع
Aurélie Féat, Walter Federle, Marleen Kamperman, Jasper van der Gucht, Coatings preventing
insect adhesion: An overview. Prog. Org. Coat., 2019, 134, 349–359.
Mutyala, K.C., Singh, H., Evans, R. and Doll, G., Effect of diamond-like carbon coatings on ball
bearing performance in normal, oil-starved, and debris-damaged conditions. Tribol. T, 2016, 59,
-1047.
Tong, Y.; Bohm, S. and Song, M. Graphene based materials and their composites as coatings.
Austin J. Nanomed. Nanotechnol., 2013, 1.
Report :Industrial Coating Market. 2022, 150 Pages, ID: 5530685.
Lind, L.; Adoberg, E.; Aarik, L.; Kulu, P.; Veinthal, R. and Aal, A. A. Tribological Properties of
PVD Coatings with Lubrication Films. Estonian Journal of Engineering, 2012, 18, 193-201.
Allen, N. S.; Edge, M.; Ortega, A.; Liauw, C. M.; Stratton, J. and McIntyre, R. B. Behaviour of
nanoparticle (ultrafine) titanium dioxide pigments and stabilisers on the photooxidative stability
of water based acrylic and isocyanate based acrylic coatings. Polymer Degradation and Stability,
, 78, 467-478.
Shao, Y.; Jia, C.; Meng, G.; Zhang, T. and Wang, F. The role of a zinc phosphate pigment in the
corrosion of scratched epoxy-coated steel. Corrosion Science, 2009, 51, 371-379.
Clarke. D. R.; Oechsner M. and Padture, N. Thermal Barrier Coatings for More Efficient Gas-
Turbine Engines. MRS Bulletin, 2012, 37, 891–898.
Ghosh, S. K. Functional coatings and microencapsulation: A general Perspective, In: Ghosh, S.
K. Ed., functional coatings: by polymer microencapsulation, Wiley-VCH, Verlag GmbH & Co.
KgaA, Weinheim, 2006, 1-28.
Jones, F. N.; Nichols, M. E. and Pappas, S. P. Organic Coatings Science and Technology, Third
Edition. Douglas A. Wicks., 2007.
Feng, W.; Patel, S. H.; Young, M. Y.; Zunino, J. L. and Xanthos, M. Smart polymeric coatings—
recent advances, Adv. Polym. Technol., 2007, 26, 1-13.
Visan, A. I.; Popescu-Pelin, G. and Socol, G. Degradation Behavior of Polymers Used as
Coating Materials for Drug Delivery-A Basic Review, Polymers, 2021, 13, 1272.
Tinh, N. et al. Degradation modes of crosslinked coatings exposed to photolytic environment. J.
Coat. Technol. Res., 2012, 10,1–14.
Guo, Q. et al. Characterization of cross-linking depth for thin polymeric films using atomic force
microscopy. J. Appl. Polym. Sci., 2015, 132, 8, 1–6.
Bossi, A. et al., Synthesis of controlled polymeric cross-linked coatings via iniferter
polymerisation in the presence of tetraethyl thiuram disulphide chain terminator. Biosens
Bioelectron., 2010, 25, 2149–2155.
Zoveidavianpoor, M. and Gharibi, A. Application of polymers for coating of proppant in
hydraulic fracturing of subterraneous formations: A comprehensive review. J. Nat. Gas Sci.
Eng., 2015, 24, 197–209.
Balazs, A. C., Emrick, T. and Russell, T. P. Nanoparticle Polymer Composites: Where Two
Small Worlds Meet. Science, 2006, 314, 1107-1110.
Ide, A. H. and Nogueira, J. New-generation Bar Adsorptive Microextraction (BAμE) Devices for
a Better Eco-user-friendly Analytical Approach –Application for the determination of
antidepressant pharmaceuticals in biological fluids. J. Pharm. Biomed. Anal., 2018, 153, 126–
Asiabi, H. et al. Electroplating of nanostructured polyaniline–polypyrrole composite coating in a
stainless-steel tube for on-line in-tube solid phase microextraction. J. Chromatogr. A, 2015,1397,
–26.
Yusoff, M. M. et al., An ionic liquid loaded magnetically confined polymeric mesoporous
adsorbent for extraction of parabens from environmental and cosmetic samples. RSC Adv., 2017,
, 35832–35844.
Trojanowicz, M., Analytical applications of carbon nanotubes: A review. TrAC Trends Anal.
Chem. 2006, 25, 480–489.
Christina S. Robb, Applications of physically adsorbed polymer coatings in capillary
electrophoresis . Journal of liquid chromatography and related technologies, 2007, 30, 729-759.
Horvath, J. and Dolník, V. Polymer wall coatings for capillary electrophoresis. Electrophoresis,
, 22, 644–655.
He Z.; Ma, M.; Lan, X.; Chen, F. et al. Fabrication of a transparent superamphiphobic coating
with improved stability, Soft Matter, 2011,7, 6435-6443
Brinker, C. J. and Scherer, G. W. Sol-Gel Science: The Physics and Chemistry of Sol-Gel
Processing, Academic Press, 2013.
Sahu , N.; Parija, B. and Panigrahi, S. Fundamental understanding and modeling of spin coating
process: a review, Indian J. Phys. 2009, 83, 493-502.
Susanna, G. et al. Airbrush spray-coating of polymer bulk-heterojunction solar cells. Sol.
Energy Mater. Sol. Cells, 2011, 95, 1775–1778.
Moridi1, A.; Hassani-Gangaraj, S. M.; Guagliano, M. and Dao, M. Cold spray coating: review
of material systems and future perspectives, Surface Engineering ,2014,36.
Mostaghimi, J.; Chandra, S. Ghafouri-Azar R. and Dolatabadi, A. Modeling thermal spray
coating processes: a powerful tool in design and optimization, Surface and Coatings Technology,
, 163–164, 1-11.
Pawlowski, L. Suspension and solution thermal spray coatings. Surf Coat Technol, 2009, 203,
–2829.
Palomba, V.; Vasta, S.; Giacoppo, G.; Calabrese, L.; Gulli‘, G.; La Rosa, D. and Freni, A.
Design of an innovative graphite exchanger for adsorption heat pumps and chillers. Energy
Procedia, 2015, 81, 1030-1040.
Wang,Y. and Bhushan, B. Wear-resistant and antismudge superoleophobic coating on
polyethylene terephthalate substrate using SiO2 nanoparticles. ACS Appl. Mater. Interfaces,
, 7, 743-755.
Tikkanen, H.; Suciu, C. ; Wærnhus, I. and Hoffmann, A.C. Dip-coating of 8YSZ nanopowder
for SOFCapplications, Ceram. Int. 2011, 37, 2869-2877.
Liu, D.; Bastiaansen, C. W.; den Toonder, J. M. and Broer, D. J. Light-Induced Formation of
Dynamic and Permanent Surface Topologies in Chiral−Nematic Polymer Networks,
Macromolecules, 2012, 45, 8005−8012.
Torabi, A.; Etsell, T.H. and Sarkar, P. Dip coating fabrication process for micro-tubular SOFCs,
Solid State Ionics, 2011, 192, 372-375.
Mohd Yusoff, M.F.; Abdul Kadir, M.R.; Iqbal, N.; Hassan, M.A. and Hussain, R. Dipcoating
of poly(ε-caprolactone)/hydroxyapatite composite coating on Ti6Al4V for enhanced corrosion
protection, Surf. Coatings Technol., 2014, 245, 102-107.
Krebs, F.C. Fabrication and processing of polymer solar cells: a review of printing and coating
techniques. Solar Energy Mater. Solar Cells, 2009, 93, 394–412.
Hoth, C. N.; Schilinsky, P.; Choulis, S.A.; Balasubramanian, S. and Brabec, C.J. Solutionprocessed
organic photovoltaics. In: Cantatore, E. (Ed.), Applications of Organic and Printed
Electronics, Integrated Circuits and Systems. Wiley-VCH Verlag, Berlin, Germany, 2013.
Di Risio, S. and Yan, N. Piezoelectric ink-jet printing of horseradish peroxidase: effect of ink
viscosity modifiers on activity. Macromol. Rapid Commun., 2007, 28, 1934–1940.
Caruso, R.A. et al., Modification of TiO2 network structures using a polymergel coating
technique. Chem. Mater., 2001,13, 1114–1123.
Lee, K.-Y; Blaker, J.J. and Bismarck, A. Surface functionalisation of bacterial cellulose as the
route to produce green polylactide nanocomposites with improved properties, Compos. Sci.
Liu, D.; Bastiaansen, C. W.; den Toonder, J. M. and Broer, D. J. Light-Induced Formation of
Dynamic and Permanent Surface Topologies in Chiral−Nematic Polymer Networks,
Macromolecules, 2012, 45, 8005−8012.
Torabi, A.; Etsell, T.H. and Sarkar, P. Dip coating fabrication process for micro-tubular SOFCs,
Solid State Ionics, 2011, 192, 372-375.
Mohd Yusoff, M.F.; Abdul Kadir, M.R.; Iqbal, N.; Hassan, M.A. and Hussain, R. Dipcoating
of poly(ε-caprolactone)/hydroxyapatite composite coating on Ti6Al4V for enhanced corrosion
protection, Surf. Coatings Technol., 2014, 245, 102-107.
Krebs, F.C. Fabrication and processing of polymer solar cells: a review of printing and coating
techniques. Solar Energy Mater. Solar Cells, 2009, 93, 394–412.
Hoth, C. N.; Schilinsky, P.; Choulis, S.A.; Balasubramanian, S. and Brabec, C.J. Solutionprocessed
organic photovoltaics. In: Cantatore, E. (Ed.), Applications of Organic and Printed
Electronics, Integrated Circuits and Systems. Wiley-VCH Verlag, Berlin, Germany, 2013.
Di Risio, S. and Yan, N. Piezoelectric ink-jet printing of horseradish peroxidase: effect of ink
viscosity modifiers on activity. Macromol. Rapid Commun., 2007, 28, 1934–1940.
Caruso, R.A. et al., Modification of TiO2 network structures using a polymergel coating
technique. Chem. Mater., 2001,13, 1114–1123.
Lee, K.-Y; Blaker, J.J. and Bismarck, A. Surface functionalisation of bacterial cellulose as the
route to produce green polylactide nanocomposites with improved properties, Compos. Sci.34. Liu, D.; Bastiaansen, C. W.; den Toonder, J. M. and Broer, D. J. Light-Induced Formation of
Dynamic and Permanent Surface Topologies in Chiral−Nematic Polymer Networks,
Macromolecules, 2012, 45, 8005−8012.
Torabi, A.; Etsell, T.H. and Sarkar, P. Dip coating fabrication process for micro-tubular SOFCs,
Solid State Ionics, 2011, 192, 372-375.
Mohd Yusoff, M.F.; Abdul Kadir, M.R.; Iqbal, N.; Hassan, M.A. and Hussain, R. Dipcoating
of poly(ε-caprolactone)/hydroxyapatite composite coating on Ti6Al4V for enhanced corrosion
protection, Surf. Coatings Technol., 2014, 245, 102-107.
Krebs, F.C. Fabrication and processing of polymer solar cells: a review of printing and coating
techniques. Solar Energy Mater. Solar Cells, 2009, 93, 394–412.
Hoth, C. N.; Schilinsky, P.; Choulis, S.A.; Balasubramanian, S. and Brabec, C.J. Solutionprocessed
organic photovoltaics. In: Cantatore, E. (Ed.), Applications of Organic and Printed
Electronics, Integrated Circuits and Systems. Wiley-VCH Verlag, Berlin, Germany, 2013.
Di Risio, S. and Yan, N. Piezoelectric ink-jet printing of horseradish peroxidase: effect of ink
viscosity modifiers on activity. Macromol. Rapid Commun., 2007, 28, 1934–1940.
Caruso, R.A. et al., Modification of TiO2 network structures using a polymergel coating
technique. Chem. Mater., 2001,13, 1114–1123.
Lee, K.-Y; Blaker, J.J. and Bismarck, A. Surface functionalisation of bacterial cellulose as the
route to produce green polylactide nanocomposites with improved properties, Compos. Sci.34. Liu, D.; Bastiaansen, C. W.; den Toonder, J. M. and Broer, D. J. Light-Induced Formation of
Dynamic and Permanent Surface Topologies in Chiral−Nematic Polymer Networks,
Macromolecules, 2012, 45, 8005−8012.
Torabi, A.; Etsell, T.H. and Sarkar, P. Dip coating fabrication process for micro-tubular SOFCs,
Solid State Ionics, 2011, 192, 372-375.
Mohd Yusoff, M.F.; Abdul Kadir, M.R.; Iqbal, N.; Hassan, M.A. and Hussain, R. Dipcoating
of poly(ε-caprolactone)/hydroxyapatite composite coating on Ti6Al4V for enhanced corrosion
protection, Surf. Coatings Technol., 2014, 245, 102-107.
Krebs, F.C. Fabrication and processing of polymer solar cells: a review of printing and coating
techniques. Solar Energy Mater. Solar Cells, 2009, 93, 394–412.
Hoth, C. N.; Schilinsky, P.; Choulis, S.A.; Balasubramanian, S. and Brabec, C.J. Solutionprocessed
organic photovoltaics. In: Cantatore, E. (Ed.), Applications of Organic and Printed
Electronics, Integrated Circuits and Systems. Wiley-VCH Verlag, Berlin, Germany, 2013.
Di Risio, S. and Yan, N. Piezoelectric ink-jet printing of horseradish peroxidase: effect of ink
viscosity modifiers on activity. Macromol. Rapid Commun., 2007, 28, 1934–1940.
Caruso, R.A. et al., Modification of TiO2 network structures using a polymergel coating
technique. Chem. Mater., 2001,13, 1114–1123.
Lee, K.-Y; Blaker, J.J. and Bismarck, A. Surface functionalisation of bacterial cellulose as the
route to produce green polylactide nanocomposites with improved properties, Compos. Sci.
Technol., 2009, 69, 2724–2733.
Siemann, U. Solvent cast technology - a versatile tool for thin film production. In: N. Stribeck
and B. Smarsly (Editors), Scattering Methods and the Properties of Polymer Materials. Berlin,
Heidelberg: Springer Berlin Heidelberg, 2005,1-14.
Wei, Q. and Haag, R. Universal polymer coatings and their representative biomedical
applications. Mater. Horiz., 2015, 2, 567–577.
Smith, J. R. and Lamprou, D. A. Polymer coatings for biomedical applications:A review. Trans.
IMF, 2014, 92, 9–19.
Sathiyanarayanan, S.; Muthukrishnan, S.; Venkatachari , G. and Trivedi D.C. Corrosion
Protection Of Steel By Polyaniline (PANI) Pigmented Paint Coating. Progressin Organic
Coatings, 2005, 53, 297-301.
Katangur, P.; Patra, P. K. and Warner, S. B. Nanostructured ultraviolet resistant polymer
coatings. Polym. Degrad. Stab., 2006 , 91, 2437–2442.
Baumert, B.; Stratmann, M. and Rohwerder, M., The deformation response of ultra-thin polymer
films on steel sheet in a tensile straining test: The role of slip bands emerging at the
polymer/metal interface. Z. Metallkd., 2004, 95, 447–455.
Kotlík, P. et al. Acrylic copolymer coatings for protection against UV rays. J. Cult. Heritage,
,15, 44-48.
Pathania, A.; Arya, R. K. and Ahuja, S., Crosslinked polymeric coatings:Preparationcharacterization, and diffusion studies. Prog. Org. Coat., 2017, 105,149–162.
التنزيلات
منشور
إصدار
القسم
الرخصة
The Authors understand that, the copyright of the articles shall be assigned to Journal of education for Pure Science (JEPS), University of Thi-Qar as publisher of the journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc. , will be allowed only with a written permission from Journal of education for Pure Science (JEPS), University of Thi-Qar.
Journal of education for Pure Science (JEPS), University of Thi-Qar, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Journal of education for Pure Science (JEPS), University of Thi-Qar are sole and exclusive responsibility of their respective authors and advertisers.
